WGR-20 3-phase rectifier
This rectifier is needed, when an additional charging controller is being used or the electricity is being led straight to the batteries.
* capacity 20 A
WGU-22 charging controller
Alters the electricity of AC-current into DC-current, suitable for the batteries. Also prevents the batteries from overcharging.
* capacity 10 A
* self current consumption 3 mA, max 10 mA
WGU-25 charging controller
Same as previous, but is being used with WS-2 and WS-4 turbines
* capacity 25 A
WGC-10 charging controller
Charging controller, wich includes microprosessor controlled additional functions, which protect the batteries. Capable to control charging currents of even 40 A. Suitable to be used with all WS-turbines in professional usage. Can also be used together with several turbines connected together, e.g. 4x WS-0,30C: each turbine will have its own WGR-20 rectifier and the current is led to the WGC-10 controller.
* capacity 40 A
* self current consumption 3 mA, max 7 mA
Automatic lubrication system
Lengthens the interval time between maintenance operations up to 5 years, after which the container of the lubrication system must be filled with
the special Windside Automatic Lubrication Grease. Recommended for remote areas and multi-turbine systems. One lubrication pump can take care of 10
units of WS-turbines at a time.
Fastening cylinder for WS-0,30C/B and WS-0,15C/B
* the turbine is being fastened to
the mast with the fastening cylinder
* standard cylinder suitable for
a mast of 170mm diameter
* material 8mm stainless steel
Fastening cylinder for WS-2B/WS-4B/C
Windside Production manufactures the generators for WS-turbines. WS-generators are being manufactured from order according to the customer's needs and wishes.
* 8A - 20A, bigger also from order
* 3-phase current, starting from 30-100 rpm
* direct driven
* standing short circuit situations
* voltage 0-400V
Artificial load for WGC-10
Arificial load is being used together with WGC-10 charging controller. After the batteries have become full, the artificial load changes the extra energy into heat. The number of the artificial loads depends on the maximum power of the generator.